ここから本文です
TWO:Ah, there were the matches at last. She could hear them rattling as they fell to the floor. She struck one, and the sudden flare half blinded her. Then she turned all the burners on, and the sudden glitter of it made her start. Really she was a good deal more ill and shaky than she had imagined.Mrs. Everdail will be glad youre here when she lands, he remarked.
Classification by type of system
1natural circulation external heating pipe type
2natural circulation calandria type
3forced circulation type
4falling-film type
5rising film type
6jacket type
7coil type
Classification by method of operation
1single effect evaporator system
2multiple effect evaporator system
3auto-vapor mechanical compression system
4auto-vapor ejector compression system
5multistage flash system

After taking into consideration of the physical and chemical property of solutions, the desired design conditions, and available utilities, we select the most suitable type of system by utilizing our years of experience and excellent results.
In addition, we can offer designs and manufacturing services that take into careful consideration compactness, energy-efficiency, and automatization.

THREE:When their train approached ours they looked out of the windows, or opened the doors, and waved and greeted and shouted at the top of their voices.Bruce smiled grimly. He knew perfectly well what a terrible significance lay behind these formal words. At the same time, he had no desire to take any advantage. There was an electric thrill in the audience as he was sworn. They thrilled with a deeper intensity as he proceeded. If ever a man stood up and committed moral and social suicide Dr. Gordon Bruce was that man at this moment.

While standard calandria type evaporation systems are widely used as the typical concentration evaporator by the various food and chemical industries, we have delivered many of those systems as finishing concentration evaporators especially for sugar solutions and starch syrups.

THREE:"Go in and win," Balmayne whispered. "Always back your luck."
  • Enables flexible operation with little influence from variations in load and raw solution concentrations because of an adequate amount of solution being held within the system. These systems are also suitable for batch type burning evaporators.
  • Concentrations can be controlled within product specifications by the cascade control using the concentrations of concentrated solution and the raw solution supply and also by the arithmetic control of raw solution concentrations, etc. (Result for sugar solutions: 75±0.2wt%)
  • High-viscosity solutions and solutions that may crystallize can also be utilized by installing a propeller in the evaporator as a forced circulation system.
THREE:26

This is a process example of a device that continuously and simultaneously concentrates two types of waste liquid with a single high-efficiency steam compressor.

THREE:"Upon my word, a most remarkable thing," he exclaimed.The black edging of the gate-posts was fresh blacklead.
  • By evaporating the steam using a mechanical compressor and reusing it, almost no heating steam is alomost required except the time of start-up, so large energy savings can be expected.
  • By combining with a thin film falling heat exchanger that does not raise the boiling point due to the liquid depth, it is possible to utilize the temperature difference of the compressor at the maximum.
  • Since the residence time and heating time are short and the holding amount is small, starting and stopping can be performed in a short time.
  • It will prevent scale adhesion in the can that the evaporator is divided into two parts, and that the supply of the undiluted solution is alternately switched over a fixed period of time to perform heat concentration.