ここから本文です
TWO:"I promise nothing. You are in no position to dictate terms. Sit down and tell me the history of the forgery."
Classification by type of system
1natural circulation external heating pipe type
2natural circulation calandria type
3forced circulation type
4falling-film type
5rising film type
6jacket type
7coil type
Classification by method of operation
1single effect evaporator system
2multiple effect evaporator system
3auto-vapor mechanical compression system
4auto-vapor ejector compression system
5multistage flash system

After taking into consideration of the physical and chemical property of solutions, the desired design conditions, and available utilities, we select the most suitable type of system by utilizing our years of experience and excellent results.
In addition, we can offer designs and manufacturing services that take into careful consideration compactness, energy-efficiency, and automatization.

THREE:With regard to the universal soul of Nature, there is, indeed, no difficulty at all. In giving a sensible realisation to the noetic ideas, she suffers no degradation or pollution by contact with the lower elements of matter. Enthroned on the outer verge of the cosmos, she governs the whole course of Nature by a simple exercise of volition, and in the enjoyment of a felicity which remains undisturbed by passion or desire. But just as we have seen the supreme Nous resolving itself into a multitude of individual intelligences, so also does the cosmic soul produce many lesser or partial souls of which our own is one. Now these derivative souls cannot all be equal, for that would be to defeat the purpose of creation, which is to realise all the possibilities of creation from the highest to the lowest. Thus each has an office corresponding to her place in the scale of perfection.452 We may say of the human soul that she stoops to conquer. Her mission is to cope with the more recalcitrant forms of matter. It is to the struggle with their impurities that the troubles and passions of our life are due. By yielding to earthly temptations, we suffer a second fall, and one much more real than the first; by overcoming them, as is perfectly in our power to do, we give scope and exercise to faculties which would otherwise307 have remained dormant and unknown. Moreover, our soul retains the privilege of returning to her former abode, enriched by the experience acquired in this world, and with that clearer perception of good which the knowledge of its opposite alone can supply. Nay, paradoxical as the assertion may seem, she has not entirely descended to earth, but remains in partial communication with the noetic world by virtue of her reasoning faculty; that is to say, when its intuitions are not darkened and disturbed by the triumph of sensuous impressions over the lower soul. On this and on many other occasions, Plotinus betrays a glimmering consciousness that his philosophy is purely subjective, and that its attempted transcendentalism is, in truth, a projection of psychological distinctions into the external world. Starting with the familiar division of human nature into body, soul, and spirit (or reason), he endeavours to find an objective counterpart for each. Body is represented by the material universe, soul by the animating principle of Nature, reason by the extramundane Nous. Under these three heads is comprised the totality of real existence; but existence itself has to be accounted for by a principle lying above and beyond it, which has still to be obtained by an effort of abstraction from the data that self-consciousness supplies.453It is common to use a flat point for draughting pencils, but a round one will often be found quite as good if the pencils are fine, and some convenience is gained by a round point for free-hand use in making rounds and fillets. A Faber pencil, that has detachable points which can be set out as they are worn away, is convenient for draughting.

While standard calandria type evaporation systems are widely used as the typical concentration evaporator by the various food and chemical industries, we have delivered many of those systems as finishing concentration evaporators especially for sugar solutions and starch syrups.

THREE:An excellent plan to retain what is learned, is to make notes. There is nothing will assist the memory more in learning mechanics than to write down facts as they are learned, even if such memoranda are never referred to after they are made.So far, Aristotle regards the soul as a function, or energy, or perfection of the body, from which it can no more be separated than vision from the eye. It is otherwise with the part of mind which he calls Nous, or Reasonthe faculty which takes cognisance of abstract ideas or the pure forms of things. This corresponds, in the microcosm, to the eternal Nous of the macrocosm, and, like it, is absolutely immaterial, not depending for its activity on the exercise of any bodily organ. There is, however, a general analogy between sensation and thought considered as processes of cognition. Previous to experience, the Nous is no thought in particular, but merely a possibility of thinking, like a smooth wax tablet waiting to be written on. It is determined to some particular idea by contact with the objective forms of things, and in this determination is raised from power to actuality. The law of moderation, however, does not apply to thought. Excessive stimulation is first injurious and then destructive to the organs of sense, but we cannot have too much of an idea; the more intense it is the better are we able to conceive all the367 ideas that come under it, just because ideation is an incorporeal process. And there seems to be this further distinction between sensation and thought, that the latter is much more completely identified with its object than the former; it is in the very act of imprinting themselves on the Nous that the forms of things become perfectly detached from matter, and so attain their final realisation. It is only in our consciousness that the eternal ideas of transient phenomena become conscious of themselves. Such, we take it, is the true interpretation of Aristotles famous distinction between an active and a passive Nous. The one, he tells us, makes whatever the other is made. The active Nous is like light raising colours from possibility to actuality. It is eternal, but we have no remembrance of its past existence, because the passive Nous, without which it can think nothing, is perishable.
  • Enables flexible operation with little influence from variations in load and raw solution concentrations because of an adequate amount of solution being held within the system. These systems are also suitable for batch type burning evaporators.
  • Concentrations can be controlled within product specifications by the cascade control using the concentrations of concentrated solution and the raw solution supply and also by the arithmetic control of raw solution concentrations, etc. (Result for sugar solutions: 75±0.2wt%)
  • High-viscosity solutions and solutions that may crystallize can also be utilized by installing a propeller in the evaporator as a forced circulation system.
THREE:If dies are fixed, the clamping mechanism to hold the rods has to run with the spindle; such machines must be stopped while fastening the rods or blanks. Clamping jaws are usually as little suited for rotation on a spindle as dies are, and generally afford more chances for obstruction and accident. To rotate the rods, if they are long, they must pass through the driving spindle, because machines cannot well be made of sufficient length to receive long rods. In machines of this class, the dies have to be opened and closed by hand instead of by the driving power, which can be employed for the purpose when the dies are mounted in a running head.

This is a process example of a device that continuously and simultaneously concentrates two types of waste liquid with a single high-efficiency steam compressor.

THREE:The first principle to be pointed out in regard to belts, to distinguish them from shafts as a means of transmitting power, is that power is communicated by means of tensile instead of torsional strain, the power during transmission being represented in the difference of tension between the driving and the slack side of belts. In the case of shafts, their length, or the distance to which they may be extended in transmitting power, is limited by torsional resistance; and as belts are not liable to this condition, we may conclude that unless there are other difficulties to be contended with, belts are more suitable than shafts for transmitting power throughout long distances. Belts suffer resistance from the air and from friction in the bearings of supporting pulleys, which are necessary in long horizontal belts; with these exceptions they are capable of moving at a very high rate of speed, and transmitting power without appreciable loss.Some uphold the accusation on the ground of expressions in Belgian newspapers, collected in a German pamphlet. In my opinion these quotations have not the slightest value. Everyone will understand this who thinks of the excitement of journalists, whose country was suddenly and quite unexpectedly involved in a terrible war, and who felt now that as journalists they had to perform a great, patriotic duty. In their nervous, over-excited condition they sat at their desk and listened to the gossip of refugees about civilians taking part in the struggle. In their imagination they saw hordes of barbarians overrun their native soil, saw man and man, woman88 and woman, shoulder to shoulder, resisting the invader without regard for their own life. The thoughts of such journalists, whose very own country had been at war now for a few days, were not on severe logical lines; they found a certain beauty in that picture, and I can quite understand how some came to believe in it as a reality, and gloried in it.
  • By evaporating the steam using a mechanical compressor and reusing it, almost no heating steam is alomost required except the time of start-up, so large energy savings can be expected.
  • By combining with a thin film falling heat exchanger that does not raise the boiling point due to the liquid depth, it is possible to utilize the temperature difference of the compressor at the maximum.
  • Since the residence time and heating time are short and the holding amount is small, starting and stopping can be performed in a short time.
  • It will prevent scale adhesion in the can that the evaporator is divided into two parts, and that the supply of the undiluted solution is alternately switched over a fixed period of time to perform heat concentration.