ここから本文です
TWO:
Classification by type of system
1natural circulation external heating pipe type
2natural circulation calandria type
3forced circulation type
4falling-film type
5rising film type
6jacket type
7coil type
Classification by method of operation
1single effect evaporator system
2multiple effect evaporator system
3auto-vapor mechanical compression system
4auto-vapor ejector compression system
5multistage flash system

After taking into consideration of the physical and chemical property of solutions, the desired design conditions, and available utilities, we select the most suitable type of system by utilizing our years of experience and excellent results.
In addition, we can offer designs and manufacturing services that take into careful consideration compactness, energy-efficiency, and automatization.

THREE:Frederick the Great had already abolished it in Prussia;[1] it had been discontinued in Sweden; it was not recognised in the military codes of Europe, and Beccaria said it was not in use in England. This was true generally, although the peine forte et dure, by which a prisoner who would not plead was subjected to be squeezed nearly to death by an iron weight, was not abolished till the year 1771.[2]

While standard calandria type evaporation systems are widely used as the typical concentration evaporator by the various food and chemical industries, we have delivered many of those systems as finishing concentration evaporators especially for sugar solutions and starch syrups.

THREE:
  • Enables flexible operation with little influence from variations in load and raw solution concentrations because of an adequate amount of solution being held within the system. These systems are also suitable for batch type burning evaporators.
  • Concentrations can be controlled within product specifications by the cascade control using the concentrations of concentrated solution and the raw solution supply and also by the arithmetic control of raw solution concentrations, etc. (Result for sugar solutions: 75±0.2wt%)
  • High-viscosity solutions and solutions that may crystallize can also be utilized by installing a propeller in the evaporator as a forced circulation system.
THREE:[180]This, then, is the way to avoid confounding the relations and invariable nature of things, which, being unlimited by time and in ceaseless operation, confounds and overturns all narrow regulations that depart from it. It is not only the arts of taste and pleasure which have for their universal principle the faithful imitation of nature; but the art of politics itself, at least that which is true and permanent, is subject to this general maxim, since it consists in nothing else than the art of directing in the best way and to the same purposes the immutable sentiments of mankind.

This is a process example of a device that continuously and simultaneously concentrates two types of waste liquid with a single high-efficiency steam compressor.

THREE:It is of interest to trace some of the practical results which followed Beccarias treatise during the thirty years that he lived after its publication; that is, from the year 1764 to 1794.But if penal laws thus express the wide variability of human morality, they also contribute to make actions moral or immoral according to the penalties by which they enforce or prevent them. For not[74] only does whatever is immoral tend to become penal, but anything can be made immoral by being first made penal; and hence indifferent actions often remain immoral long after they have ceased to be actually punishable. Thus the Jews made Sabbath-breaking equally immoral with homicide or adultery, by affixing to each of them the same capital penalty; and the former offence, though it no longer forms part of any criminal code, has still as much moral force against it as many an offence directly punishable by the law.
  • By evaporating the steam using a mechanical compressor and reusing it, almost no heating steam is alomost required except the time of start-up, so large energy savings can be expected.
  • By combining with a thin film falling heat exchanger that does not raise the boiling point due to the liquid depth, it is possible to utilize the temperature difference of the compressor at the maximum.
  • Since the residence time and heating time are short and the holding amount is small, starting and stopping can be performed in a short time.
  • It will prevent scale adhesion in the can that the evaporator is divided into two parts, and that the supply of the undiluted solution is alternately switched over a fixed period of time to perform heat concentration.